Closed Type Small Pipe Welding Machine

Short Description:

This small tube automatic welding equipment is mainly used in tube to tube welding in electronics, instrumentation, pharmaceutical, engineering installation, military and nuclear power industries.


Product Detail

This automatic pipe welding machine (also known as automatic small pipe welding machine, closed type orbital welding machine, using GTAW welding process) is a special welding torch for all-position automatic tungsten arc welding (without welding wire) designed for butt joints of various pipe fittings. Fill the protective gas in the sealing cavity before welding to ensure that the welding seam is well protected. The gun body and the clamp body are air-cooled. 

According to customer requirements, we can customize the compound fixture within the pipe diameter range. This fixture system can ensure the precise positioning of the welded parts without the need for positioning spot welding, so as to provide customers with high-efficiency and high-quality special welding guns. It can precisely realize all-position TIG tube/tube welding, with high reproducibility of welding results and ideal welding results.

This small tube automatic welding equipment is mainly used in tube to tube welding in electronics, instrumentation, pharmaceutical, engineering installation, military and nuclear power industries.

Technical Parameters

Model

MT40

MT80

MT120

GT

Pipe Diameter(mm)

6-38.1

12.7-76.2

38-114

3-15.8

Rotating Speed(rpm)

0.3-6

0.2-5.3

0.6-12

0.3-6.0

Protect Gas

Ar

Ar

Ar

Ar

Cooling Way

Water Cooling

Water Cooling

Water Cooling

Water Cooling

图片1
图片41
图片31
图片22

Device application:

Pipe diameter: 6-114mm (see the table above for different pipe diameter ranges)

Tube thickness: ≤3mm;

Tube material: stainless steel, carbon steel, titanium alloy, etc.;

Welding posture: all-position welding;

Welding form: butt, straight pipe and straight pipe, straight pipe and elbow, straight pipe and tee, etc.;

When welding carbon steel pipes, 5-8mm of the weld should be polished and derusted to expose the primary color of the metal;

The incision of the pipe should be flat, vertical and deburred, and there should be no gap after the two pipes are on top of each other, and the two pipes should be spot welded together;

Clean oil stains with acetone or alcohol


  • Previous:
  • Next:

  • Write your message here and send it to us

    Products categories